IE3 Industrial Motor / Energy Saving Motor

-- Steady & Reliable Manufacturer --

Brief Product Description

Efficiency ClassIE3 Premium Efficiency

Pole Count and Speed2, 4, 6 or 8 poles, about 690 to 2,980 rpm depending on poles

Power Range0.75 to 355 kW

Frame Size80 to 355

Voltage and Frequency380 V, 400 V, 415 V, 50 Hz (60 Hz on request)

Protection and InsulationIP55, Insulation Class F

CustomizationOEM, ODM, special voltage, 60 Hz, brake, VFD

Samples and MOQSamples available, small trial orders accepted

IE3 Industrial Motor / Energy Saving Motor from Zhejiang Kuayue Motor is a three-phase asynchronous induction motor designed to the IE3 Premium Efficiency class of IEC 60034-30-1. It is the general-purpose IE3 workhorse for industrial plants, combining Premium Efficiency with standard IEC frames and IP55 protection. Against an IE2 motor of the same rating, it wastes roughly 15 to 20 percent less energy as heat, which is why distributors and OEMs treat it as the standard export specification.

Typical buyers include machinery OEMs, distributors, pump and fan builders and maintenance buyers replacing IE1 or IE2 motors. They usually purchase against a drawing or an existing equipment specification, so the motor has to match shaft, frame and mounting exactly, not only the kilowatt rating. Many of them also resell under their own brand, so consistent quality across batches and clear technical documents matter as much as the unit price.

When comparing offers, the parameters that matter most are efficiency class and test data, rated speed, power range (0.75 to 355 kW), frame size, voltage and frequency, protection class (IP55) and insulation class (F). For IE3, also confirm efficiency values at partial load, since regulators and end customers increasingly ask for them.

As a factory with 34 years of motor experience, a 29 mu production base and more than 30 staff, we handle OEM private-label production, ODM engineering for special voltage, frequency, mounting, brake or VFD needs, and sample motors for new projects. Mass production starts after sample performance is verified, small trial orders are accepted, and mixed ratings can be loaded into one container for export to Europe, America, Southeast Asia and the Middle East.

Product Overview

IE3Efficiency class

3,000 to 750 rpmSynchronous speed at 50 Hz

0.75 to 355 kWPower range

80 to 355Frame size

IE3 Industrial Motor / Energy Saving Motor refers to an IE3 three-phase induction motor used as the everyday drive for industrial machinery, and chosen because it also saves energy compared with older IE1 and IE2 motors. The stator winding creates a rotating field, the squirrel-cage rotor follows it with a small slip, and the shaft turns at about 690 to 2,980 rpm depending on pole count.

As an industrial motor it uses a robust frame, IP55 protection and Class F insulation, and is rated for S1 continuous duty. IE3 efficiency comes from lower iron and copper losses than IE2 motors, which typically means around 15 to 20 percent less wasted energy and a cooler-running winding.

For most buyers, IE3 is the sensible default: it meets the efficiency level many markets require, costs less than IE4 and is available in the widest range of ratings, from 0.75 to 355 kW.

Main points for buyers

1Confirm the efficiency class. Check the IE3 marking and ask for efficiency at 100, 75 and 50 percent load, not only the class label.
2Match rated speed, not only pole count. A small slip difference changes fan and pump power noticeably.
3Check the mechanical interface. Compare frame size, mounting (B3, B5 or B35), shaft diameter and flange with the driven equipment drawing.
4Lock down the electrical data. Confirm voltage, frequency and terminal connection before ordering, because special windings take longer than standard ones.
5Request the paperwork. Ask for CE and CCC documents, nameplate data and test reports so customs and your own customers have no questions.

When comparing quotations for IE3 Industrial Motor / Energy Saving Motor, look beyond the ex-works price. Rated power and frame size set the material content, while copper and silicon steel prices move the figure from month to month. Special voltage, 60 Hz windings, a higher protection class, brakes or encoders add cost, as do test reports and OEM packaging. Order quantity, container loading, sea freight, import duty and local VAT then decide the landed cost per unit, so ask each supplier to quote on the same Incoterm and the same rating.

Typical specification of the IE3 Industrial Motor / Energy Saving Motor. Values are standard offers; ratings, voltage and options can be adjusted to your order.

Parameter	Standard Offer	Customization Options
Product type	Three-phase asynchronous induction motor, squirrel-cage rotor	ODM design from your working conditions
Model series	YE3 series	Private-label model name on the nameplate
Efficiency class	IE3 Premium Efficiency (IEC 60034-30-1)	Efficiency test report with the shipment on request
Number of poles	2, 4, 6 or 8	Pole count selected per order
Synchronous speed at 50 Hz	3,000 to 750 rpm (2 to 8 poles)	Specify the pole count with the order
Rated speed at 50 Hz	690 to 2,980 rpm depending on poles	Depends on power rating and supply frequency
Power range	0.75 to 355 kW	Other ratings on request
Frame size	80 to 355	Special shaft or flange dimensions on request
Rated voltage	380 V, 400 V or 415 V, three-phase	220 V to 690 V and other voltages on request
Frequency	50 Hz	60 Hz winding and nameplate
Protection class	IP55	IP56 or IP65 on request
Insulation and temperature rise	Class F insulation, Class B temperature rise	Class H insulation and thermistors on request
Duty type	S1 continuous	S2 to S8 on request after thermal check
Cooling method	IC411, totally enclosed fan-cooled	IC416 separate fan for VFD operation
Mounting	B3, B5 and B35	V1 and other mounting forms
Housing material	Cast iron frame and end shields for most ratings	Aluminium frame on small ratings on request
Ambient and altitude	Minus 15 to plus 40 degrees C, up to 1,000 m	Higher altitude or temperature with derating
Options	Standard motor without options	Brake, encoder, space heater, explosion-proof, VFD-ready design
Certification and quality system	ISO9001, China CCC, EU CE	Inspection and test documents on request
Nameplate, color and packaging	Standard nameplate, standard color, export carton	OEM nameplate, RAL color, wooden case

Final values for a given rating are confirmed on the datasheet issued with your quotation.

Application

The IE3 Industrial Motor / Energy Saving Motor is used wherever a reliable, efficient three-phase drive is needed. The sections below cover typical industries, buyer types, selection and day-to-day use.

Application Scenarios

Industry	Typical Equipment	Why It Fits
Conveying and material handling	Belt conveyors, feeders, screw conveyors	Standard IEC frame sizes fit common gearboxes and reducers
Pump and HVAC	Water pumps, booster sets, air-handling fans	Long running hours make efficiency gains visible on the energy bill
Mining and quarrying	Crushers, screens, ventilation fans	Continuous S1 duty and an IP55 enclosure handle dust and shock
Machine tools	Grinders, presses, hydraulic pump drives	Compact frames and steady torque for production machinery
Export machinery and OEM equipment	Packaged machines shipped to regulated markets	Meeting the efficiency level avoids redesign and customs questions

Target Customers

Machinery OEMsNeed a standard efficient motor that fits gearboxes, pumps and conveyors without redesign.

Distributors and wholesalersNeed popular ratings, consistent quality and clear documents for several markets.

Maintenance and energy managersNeed replacement motors that cut energy cost on equipment that runs most of the year.

Pump and fan manufacturersNeed efficient motors that match pump and fan curves and existing brackets.

Suitable and Unsuitable Uses

Suitable Uses

General industrial drives with moderate to long running hours
Machinery shipped to markets that require IE3
Replacement of IE1 or IE2 motors with a matching frame

Not Recommended

Very short-duty or rarely used equipment where purchase price decides
Explosive atmospheres unless an explosion-proof version is specified
Loads with special torque needs that have not been checked with our engineers

Selection Guidance

1Define the load. Set required shaft power, starting torque and duty cycle before looking at models.
2Choose the speed or type. Treat IE3 as the baseline and move to IE4 only when running hours justify it. Confirm pole count, frame, mounting and voltage against the driven machine.
3Set the environment. Note ambient temperature, altitude, dust, moisture and whether IP55 or higher is needed.
4Fix the interface. Confirm voltage, frequency, mounting type, shaft size and the documents your market requires.

Usage Notes

Compare supply voltage and frequency with the nameplate before connecting, and stay within plus or minus 5 percent voltage.
Check that the star or delta connection matches the nameplate and the supply.
Measure insulation resistance before the first start, and again after long storage or damp conditions.
Align the coupling or set belt tension correctly, since misalignment is a leading cause of early bearing failure.
Keep the fan cover clear and leave space for airflow around the frame.
When replacing an IE1 or IE2 motor, check rated speed and starting current, because efficient motors can draw higher inrush current.
Fit overload and thermal protection, and respect the permitted number of starts per hour.

Advantages

Mass-volume ordersStandardized line operation across the YE3 series range keeps production steady and shortens lead time on repeat orders. Standard IE3 Industrial Motor / Energy Saving Motor ratings are planned in batches, so a container of mixed ratings can usually be loaded from one production window. For importers and distributors, that means more predictable delivery dates and less stock-out risk.

OEM private labelWe manufacture finished motors to the nameplate and packaging requirements you supply, with your brand and rating data printed as agreed. Artwork is confirmed before production, so the first shipment of IE3 Industrial Motor / Energy Saving Motor arrives ready for your channel without relabeling.

ODM developmentOur engineers work from your working-condition requirements and carry the project through design, prototyping, trial run and mass production. Special voltage, frequency, mounting dimension, explosion-proof, brake or VFD specifications stay in one project, which avoids mismatched parts from several suppliers.

Fast prototyping serviceSample motors are available for new projects, and mass production starts only after sample performance is verified. Testing a IE3 Industrial Motor / Energy Saving Motor sample on your own equipment first removes the risk of a wrong specification in a full container.

Certified quality systemProduction runs under an ISO9001 quality-management system, and the range holds China CCC compulsory certification and EU CE certification. With these documents ready, importers face fewer compliance questions at customs and from their own customers.

34 years of motor experienceOur 29 mu production base and more than 30 staff have supplied motors across more than 20 Chinese provinces, and exports reach Europe, America, Southeast Asia and the Middle East. That export history means correct packing, documents and after-sales handling, which lowers delivery and warranty risk.

Item	Detail
Sampling	Sample motors for new projects, approved before mass production
Customization	Voltage, frequency, mounting, brake, explosion-proof, VFD-ready design
Nameplate and packaging	Supplied by customer artwork or standard export packing
Documents	ISO9001 system, China CCC, EU CE, test reports on request

Frequently Asked Questions

Q: Why is IE3 the standard choice for industrial motors?
A: It meets the efficiency level most markets now expect, costs less than IE4 and is available across the widest range of ratings. It is therefore the default for most machinery and replacement orders.

Q: Can an IE3 motor replace an IE2 motor directly?
A: Usually yes, since frame and mounting dimensions follow the same IEC standards. Check rated speed, because lower slip gives slightly higher speed, and check starter ratings because inrush current can be higher.

Q: How much energy will an IE3 motor save compared with IE2?
A: Losses are typically about 15 to 20 percent lower, so the saving depends on motor size and running hours. Long continuous duty gives the largest saving.

Q: What is the difference between IE2, IE3 and IE4 efficiency classes?
A: IEC 60034-30-1 ranks motors from IE1 to IE4, and each step up cuts losses, typically by about 15 to 20 percent. IE3 is Premium Efficiency and IE4 is Super Premium Efficiency.

Q: What is the typical lead time?
A: Standard ratings usually ship faster than customized ones. Lead time depends on model, quantity and special requirements, so we confirm a delivery date together with the quotation.

Q: Can the IE3 Industrial Motor / Energy Saving Motor be used with a variable frequency drive?
A: Yes, for most applications. The windings use Class F insulation, and for wide speed ranges or long periods at low frequency we recommend a separate cooling fan, thermal protection and, on larger frames, an insulated bearing. Tell us the speed range when you inquire.

Q: What information do you need to prepare a quotation?
A: Please send rated power, pole count or speed, voltage and frequency, mounting type (B3, B5 or B35), protection class, quantity and destination port. Nameplate and packaging requirements help us finalize the price faster.

Q: Can you produce the IE3 Industrial Motor / Energy Saving Motor under my own brand?
A: Yes. We build finished motors to the nameplate, color and packaging requirements you provide. Send the artwork and rating data for confirmation, and we approve a sample before production begins.

Q: Can I get a sample of the IE3 Industrial Motor / Energy Saving Motor before placing a bulk order?
A: Yes. Sample motors are available for new projects, and mass production starts only after sample performance has been verified on your side. Sample lead time depends on rating and customization, so please confirm it with our sales team.

Contact us to learn more

Tell us about your project and our sales engineers will recommend the right IE3 Industrial Motor / Energy Saving Motor model, with a datasheet and quotation to match. New customers can start with a sample, and OEM or ODM requirements are welcome from the first message.

Please include in your inquiry

Rated power and pole count or speed
Voltage and frequency
Mounting type and shaft size
Protection class and ambient conditions
Quantity and destination port
Nameplate and packaging requirements

What you receive

A datasheet and quotation for your rating
A sample plan for new projects
Customization advice from our engineers
Certificate and test document information

Send your inquiry through the form on this page. Zhejiang Kuayue Motor supplies three-phase asynchronous motors and industrial pumps worldwide, backed by 34 years of motor manufacturing experience.

IE3 Industrial Motor / Energy Saving Motor

Brief Product Description

YE4/IE4 High-Speed Energy-Saving Induction Motor (2-pole)

YE4/IE4 High-Torque Energy-Saving Induction Motor (6-pole)

YE4/IE4 Low-Speed Heavy-Duty Energy-Saving Induction Motor (8-pole)

YE4/IE4 General-Purpose Energy-Saving Induction Motor (4-pole)

YE3/IE3 High-Speed Aluminum Shell Induction Motor (2-pole)

YE3/IE3 Compact Aluminum Housing Induction Motor (4-pole)

YE3/IE3 Precision Aluminum Housing Induction Motor (6-pole)

YE3/IE3 Low-Speed Direct-Drive Induction Motor (8-pole)

YE3/IE3 Heavy-Duty High-Efficiency Induction Motor (6-pole)